welding

We were slowly working our way over the car rubbing down each panel and checking that everything was perfect, the following drama unfolds from what i saw as a small crack in some unneccesary filler/bog on the underside of the left hand (that's the passenger side in australia!) sill (below the door) section, poked it with a screwdriver and about 10mm of filler/bog fell out, as we've done a lot of work on the car and left no more than 1-2mm of filler anywhere on it, this simply had to go, the fix was fairly obvious, obtain the sill from a donar car - fortunately the insides of these are galvenis